WE ARE AN ISO 9001:2008 CERTIFIED COMPANY
Get a Quote

ASTM A515 Gr 70 Sheets & Plates

ASTM A515 Gr 70 Sheets & Plates

Carbon Steel A515 Gr 70 Plate, A515 Gr 70 Carbon Steel Sheet, Buy High Quality Carbon Steel A515 Gr 70 Perforated Sheets, Carbon Steel A515 Gr 70 Sheet, Carbon Steel A515 Grade 70 Perforated Coil Dealer, Carbon Steel A515 Gr 70 CR Sheet, Carbon Steel A515 Gr 70 Plates Exporter.

Carbon Steel Gr 70 Sheets & Plates

Table of Contents

 

Large Selection of Carbon A515 Gr 70 Hot Rolled Plates, ASME SA515 Gr 70 Carbon Cold Rolled Plates, Carbon Steel A515 Grade 70 Plates, ASTM A515 Gr 70 Carbon Steel Shim Sheet, Carbon Steel A515 Gr 70 Chequered Plate, A515 Gr 70 Carbon Steel 2B Finish Sheet, Carbon Steel A515 Gr 70 Plates Supplier in India.

Versatile Overseas is a widespread manufacturer of Carbon Steel ASTM A515 Grade 70 Plates, whichcan disjoint two pipes very easily. Carbon Steel ASTM A515 Grade 70 Sheets are used to manufacture high quality tube plugs in a variety of end connections.

These Carbon Steel ASME SA515 Grade 70 Coils come in one-piece body design and the easy to replace plug assembly make these very easy to maintain and clean. ASTM A515 Carbon Steel Grade 70 Sheets is a length of straight pipe with male threads on both ends, which is a connector or a coupling threaded on both ends. ASTM A515 Carbon Steel Grade 70 Plates are used to allow plumbing to be connected to a water heater or other plumbing. ASME SA515 Carbon Steel Grade 70 Coils are recommended for low-pressure discharge and suction service for various compatible liquids and not for compressible products like air, nitrogen or steam. CS ASME SA 515 Grade 70 Sheets is a type of equipment designed in such a way to unite two pipes which can be detached without causing any deformation to the pipes.


Any kind of small diameter piping connections for CS ASME SA 516 Grade 60 Plates requiring a positive seal and easy assembly as well as disassembly are made with the help of pipe union. CS ASME SA 515 Grade 70 Coils is used to connect pipelines with a pipe at a right angle with the line.

Specification Of ASTM A515 Gr 70 Sheets & Plates

Gr 70 Sheets & Plates Specifications ASTM A515 / ASME SA515, BS EN 10088-2, en 10028-7, IS 6911
Gr 70 Sheets & Thickness 8 mm To 100 mm
Carbon Steel Gr 70 Sheets & Width 1500mm x 3500mm
Carbon Steel Gr 70 Sheets & Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Gr 70 Carbon Steel Sheets & Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching, etc
Carbon Steel Gr 70 Sheets & Length 3000 mm to 8000 mm
Carbon Steel Gr 70 Sheets & Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Carbon Steel Gr 70 Sheets & Origin Indian Origin, European Origin, Japanese Origin
Carbon Steel Gr 70 Sheets & Testing and Documents Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
Carbon Steel Gr 70 Sheets & Packing Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Chemical Composition of Carbon Steel Gr 70 Sheets & Plates

Grade C Mn Si P S
Carbon Steel Gr 70 0.30-0.35 1.30 max 0.035 max 0.035 max 0.13-0.45

Mechanical Properties of Carbon Steel A515 Gr 70 Sheets & Plates

Grade Thickness Yield Tensile Elongation
Carbon Steel Gr 70 50-200mm MPa -551 min MPa – 485-620 17-21%

ASTM A515 Carbon Steel Gr 70 Chequered Plate

ASTM A515 Carbon Steel Gr 70 Shim Sheets

ASTM A515 Carbon Steel Gr 70 Perforated Sheets

ASTM A515 Carbon Steel Gr 70 Hot Rolled Plates

ASTM A515 Carbon Steel Gr 70 Cold Rolled Plates

ASTM A515 Carbon Steel Gr 70 Slitting Coil

ASTM A515 Carbon Steel Gr 70 Perforated Coil

ASTM A515 Carbon Steel Gr 70 Foils

ASTM A515 Gr 70 Sheets & Plates Thickness Chart

Thickness Thickness Size Range Surface Area per Unit weight Approx Weight per Sheet
inches mm lbs/ft² kg/m² lbs kg
0.015 0.381 36 x 96 0.630 3.07566 15.12 6.84936
0.015 0.381 36 x 120 0.630 3.07566 18.90 8.5617
0.0178 0.45212 36 x 96 0.756 3.690792 18.15 8.22195
0.0178 0.45212 36 x 120 0.756 3.690792 22.68 10.27404
0.0178 0.45212 48 x 96 0.756 3.690792 24.19 10.95807
0.0178 0.45212 48 x 120 0.756 3.690792 30.24 13.69872
0.0235 0.5969 30 x 96 1.008 4.921056 20.16 9.13248
0.0235 0.5969 30 x 120 1.008 4.921056 25.20 11.4156
0.0235 0.5969 36 x 96 1.008 4.921056 24.19 10.95807
0.0235 0.5969 36 x 120 1.008 4.921056 30.24 13.69872
0.0235 0.5969 36 x 144 1.008 4.921056 36.29 16.43937
0.0235 0.5969 48 x 96 1.008 4.921056 32.26 14.61378
0.0235 0.5969 48 x 120 1.008 4.921056 40.32 18.26496
0.0235 0.5969 48 x 144 1.008 4.921056 48.39 21.92067
0.0291 0.73914 30 x 96 1.260 6.15132 25.20 11.4156
0.0291 0.73914 30 x 120 1.260 6.15132 31.50 14.2695
0.0291 0.73914 36 x 96 1.260 6.15132 30.24 13.69872
0.0291 0.73914 36 x 120 1.260 6.15132 37.80 17.1234
0.0291 0.73914 36 x 144 1.260 6.15132 45.37 20.55261
0.0291 0.73914 48 x 96 1.260 6.15132 40.32 18.26496
0.0291 0.73914 48 x 120 1.260 6.15132 50.41 22.83573
0.0291 0.73914 48 x 144 1.260 6.15132 60.49 27.40197
0.0355 0.9017 30 x 96 1.512 7.381584 30.24 13.69872
0.0355 0.9017 30 x 120 1.512 7.381584 37.80 17.1234
0.0355 0.9017 36 x 96 1.512 7.381584 36.29 16.43937

ASTM A515 Gr 70 Sheets & Plates Sheets & Plates Weight Per Square Meter

Size (mm) Weight per
Sheet (Kg)		 Size (mm) Weight per
Sheet (Kg)
2000 x1000 x 0.7 11.5 2500 x 1250 x 1.5 38.4
2500 x1250 x 0.7 17.9 3000 x 1500 x 1.5 55.3
2000 x1000 x 0.9 14.7 2000 x 1000 x 2.0 32.7
2500 x1250 x 0.9 23.0 2500 x 1250 x 2.0 51.2
2000 x1000 x 1.0 16.4 3000 x 1500 x 2.0 73.7
2500 x1250 x 1.0 25.6 2000 x 1000 x 2.5 40.9
3000 x1500 x 1.0 36.8 2500 x 1250 x 2.5 63.9
2000 x1000 x 1.2 19.6 3000 x 1500 x 2.5 92.1
2500 x1250 x 1.2 30.7 2000 x 1000 x 3.0 49.6
3000 x1500 x 1.2 44.2 2500 x 1250 x 3.0 77.5
2000 x1000 x 1.5 24.6 3000 x 1500 x 3.0 112.0

Carbon Steel Gr 70 Sheets & Plates Other Available Products

Grade Gr 70 Hot Rolled Plates Gr 70 Carbon Steel Cold Rolled Plates
ASME SA515 Gr 70 Shims Carbon Steel Gr 70 Chequered Plate
ASTM A515 Type Gr 70 Carbon Steel Strips ASTM A515 Carbon Steel Gr 70 Foils
PED Approved ASME SA515 Gr 70 HR Plates Grade Gr 70 Shim Sheet
ASME SA515 Gr 70 2B Finish Plate AISI Gr 70 Carbon Steel Plate
Gr 70 Carbon Steel Sheets ASTM A515 4 Finish Plate
Gr 70 Carbon Steel 2D Finish Plate Carbon Steel Gr 70 Sheet No 4 Finish Size
ASTM A515 Type Gr 70 Cut To Size Sheets & Plates Gr 70 Carbon Steel Circle Price Per Kg
ASTM A515 Gr 70 Stainless Coils AISI Gr 70 Carbon Steel Foils
Gr 70 Sheet at Best Price in India ASME SA515 Gr 70 Strips
Carbon Steel Gr 70 20 mm Thick Plate Suppliers at low prices Carbon Steel ASME SA515 Gr 70 Sheets
Carbon Steel Gr 70 Outokumpu Sheet Supplier Carbon Steel Gr 70 Matte Sheet Price

CS Sheets & Plates

Sheets & Plate Materials

Product Range

manufacturer & exporter stockist supplier of Carbon Steel, mild steel and alloy steel Ferrous & Non Ferrous Products

Quick Contact