WE ARE AN ISO 9001:2008 CERTIFIED COMPANY
Get a Quote

ASTM A516 Gr 60 Sheets & Plates

ASTM A516 Gr 60 Sheets & Plates

Carbon Steel A516 Gr 60 Plate, A516 Gr 60 Carbon Steel Sheet, Buy High Quality Carbon Steel A516 Gr 60 Perforated Sheets, Carbon Steel A516 Gr 60 Sheet, Carbon Steel A516 Grade 60 Perforated Coil Dealer, Carbon Steel A516 Gr 60 CR Sheet, Carbon Steel A516 Gr 60 Plates Exporter.

Carbon Steel Gr 60 Sheets & Plates

Table of Contents

 

Large Selection of Carbon A516 Gr 60 Hot Rolled Plates, ASME SA516 Gr 60 Carbon Cold Rolled Plates, Carbon Steel A516 Grade 60 Plates, ASTM A516 Gr 60 Carbon Steel Shim Sheet, Carbon Steel A516 Gr 60 Chequered Plate, A516 Gr 60 Carbon Steel 2B Finish Sheet, Carbon Steel A516 Gr 60 Plates Supplier in India.

Versatile Overseas is a widespread trader of Carbon Steel ASTM A516 Grade 60 Plates, which provide a greater ease of alignment in assembly and are used for special applications. Carbon Steel ASTM A516 Grade 60 Sheets have a lower initial cost than welding alloy because they require less accuracy in cutting pipe to length.

However, the calculated strength of this Carbon Steel ASMESA516 Grade 60 Coils under internal pressure is approximately two-thirdsthe strength of welding alloy, and their life under fatigue is one-third shorter. ASTM A516 Carbon Steel Grade 60 Sheets can be assembled without welding and can be used in extremely high pressure services, at or near atmospheric pressure, where steel is essential for strength. ASME SA516 Carbon Steel Grade 60 Plates are not suited for conditions involving temperature or bending stresses or under cyclic conditions where leakage through the threads may occur. ASTM A516 Carbon Steel Grade 60 Coils are time and again used by means of their most significant benefit.CS ASME SA 516 Grade 60 Sheets can be used for unanticipated situations and in very much impulsive regions where welding is hazardous.


CS ASME SA 516 Grade 60 Plates are by and large used in industrial vessels and on power plants, because of their noteworthy benefits. CS ASME SA 516 Grade 65 Coils are available in all pressure classes and offer anexcellent substitute to connect two different pipe sizes.

Specification Of ASTM A516 Gr 60 Sheets & Plates

Gr 60 Sheets & Plates Specifications ASTM A516 / ASME SA516, BS EN 10088-2, en 10028-7, IS 6911
Gr 60 Sheets & Thickness 8 mm To 100 mm
Carbon Steel Gr 60 Sheets & Width 1500mm x 3500mm
Carbon Steel Gr 60 Sheets & Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Gr 60 Carbon Steel Sheets & Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Carbon Steel Gr 60 Sheets & Length 3000 mm to 8000 mm
Carbon Steel Gr 60 Sheets & Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Carbon Steel Gr 60 Sheets & Origin Indian Origin, European Origin, Japanese Origin
Carbon Steel Gr 60 Sheets & Testing and Documents Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
Carbon Steel Gr 60 Sheets & Packing Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Chemical Composition of Carbon Steel Gr 60 Sheets & Plates

Grade C Mn Si P S
Carbon Steel Gr 60 0.21-0.27 0.55 – 0.98 0.035 max 0.035 max 0.13-0.45

Mechanical Properties of Carbon Steel A516 Gr 60 Sheets & Plates

Grade Thickness Yield Tensile Elongation
Carbon Steel Gr 60 6-100mm MPa -220 min MPa – 415-550 21-25%

ASTM A516 Carbon Steel Gr 60 Chequered Plate

ASTM A516 Carbon Steel Gr 60 Shim Sheets

ASTM A516 Carbon Steel Gr 60 Perforated Sheets

ASTM A516 Carbon Steel Gr 60 Hot Rolled Plates

ASTM A516 Carbon Steel Gr 60 Cold Rolled Plates

ASTM A516 Carbon Steel Gr 60 Slitting Coil

ASTM A516 Carbon Steel Gr 60 Perforated Coil

ASTM A516 Carbon Steel Gr 60 Foils

ASTM A516 Gr 60 Sheets & Plates Thickness Chart

Thickness Thickness Size Range Surface Area per Unit weight Approx Weight per Sheet
inches mm lbs/ft² kg/m² lbs kg
0.015 0.381 36 x 96 0.630 3.07566 15.12 6.84936
0.015 0.381 36 x 120 0.630 3.07566 18.90 8.5617
0.0178 0.45212 36 x 96 0.756 3.690792 18.15 8.22195
0.0178 0.45212 36 x 120 0.756 3.690792 22.68 10.27404
0.0178 0.45212 48 x 96 0.756 3.690792 24.19 10.95807
0.0178 0.45212 48 x 120 0.756 3.690792 30.24 13.69872
0.0235 0.5969 30 x 96 1.008 4.921056 20.16 9.13248
0.0235 0.5969 30 x 120 1.008 4.921056 25.20 11.4156
0.0235 0.5969 36 x 96 1.008 4.921056 24.19 10.95807
0.0235 0.5969 36 x 120 1.008 4.921056 30.24 13.69872
0.0235 0.5969 36 x 144 1.008 4.921056 36.29 16.43937
0.0235 0.5969 48 x 96 1.008 4.921056 32.26 14.61378
0.0235 0.5969 48 x 120 1.008 4.921056 40.32 18.26496
0.0235 0.5969 48 x 144 1.008 4.921056 48.39 21.92067
0.0291 0.73914 30 x 96 1.260 6.15132 25.20 11.4156
0.0291 0.73914 30 x 120 1.260 6.15132 31.50 14.2695
0.0291 0.73914 36 x 96 1.260 6.15132 30.24 13.69872
0.0291 0.73914 36 x 120 1.260 6.15132 37.80 17.1234
0.0291 0.73914 36 x 144 1.260 6.15132 45.37 20.55261
0.0291 0.73914 48 x 96 1.260 6.15132 40.32 18.26496
0.0291 0.73914 48 x 120 1.260 6.15132 50.41 22.83573
0.0291 0.73914 48 x 144 1.260 6.15132 60.49 27.40197
0.0355 0.9017 30 x 96 1.512 7.381584 30.24 13.69872
0.0355 0.9017 30 x 120 1.512 7.381584 37.80 17.1234
0.0355 0.9017 36 x 96 1.512 7.381584 36.29 16.43937

ASTM A516 Gr 60 Sheets & Plates Sheets & Plates Weight Per Square Meter

Size (mm) Weight per
Sheet (Kg)		 Size (mm) Weight per
Sheet (Kg)
2000 x1000 x 0.7 11.5 2500 x 1250 x 1.5 38.4
2500 x1250 x 0.7 17.9 3000 x 1500 x 1.5 55.3
2000 x1000 x 0.9 14.7 2000 x 1000 x 2.0 32.7
2500 x1250 x 0.9 23.0 2500 x 1250 x 2.0 51.2
2000 x1000 x 1.0 16.4 3000 x 1500 x 2.0 73.7
2500 x1250 x 1.0 25.6 2000 x 1000 x 2.5 40.9
3000 x1500 x 1.0 36.8 2500 x 1250 x 2.5 63.9
2000 x1000 x 1.2 19.6 3000 x 1500 x 2.5 92.1
2500 x1250 x 1.2 30.7 2000 x 1000 x 3.0 49.6
3000 x1500 x 1.2 44.2 2500 x 1250 x 3.0 77.5
2000 x1000 x 1.5 24.6 3000 x 1500 x 3.0 112.0

Carbon Steel Gr 60 Sheets & Plates Other Available Products

Grade Gr 60 Hot Rolled Plates Gr 60 Carbon Steel Cold Rolled Plates
ASME SA516 Gr 60 Shims Carbon Steel Gr 60 Chequered Plate
ASTM A516 Type Gr 60 Carbon Steel Strips ASTM A516 Carbon Steel Gr 60 Foils
PED Approved ASME SA516 Gr 60 HR Plates Grade Gr 60 Shim Sheet
ASME SA516 Gr 60 2B Finish Plate AISI Gr 60 Carbon Steel Plate
Gr 60 Carbon Steel Sheets ASTM A516 4 Finish Plate
Gr 60 Carbon Steel 2D Finish Plate Carbon Steel Gr 60 Sheet No 4 Finish Size
ASTM A516 Type Gr 60 Cut To Size Sheets & Plates Gr 60 Carbon Steel Circle Price Per Kg
ASTM A516 Gr 60 Stainless Coils AISI Gr 60 Carbon Steel Foils
Gr 60 Sheet at Best Price in India ASME SA516 Gr 60 Strips
Carbon Steel Gr 60 20 mm Thick Plate Suppliers at low prices Carbon Steel ASME SA516 Gr 60 Sheets
Carbon Steel Gr 60 Outokumpu Sheet Supplier Carbon Steel Gr 60 Matte Sheet Price

CS Sheets & Plates

Sheets & Plate Materials

Product Range

manufacturer & exporter stockist supplier of Carbon Steel, mild steel and alloy steel Ferrous & Non Ferrous Products

Quick Contact